The Safety Requirements For Steel Bending Machines

Here is Precision Machining Stirrup Bender Supplier talking about the safety requirements for steel bending machines.

If you need the information about Stirrup Bender, feel free to contact us.

The Stirrup Bending Machine belongs to the equipment of the steel bar processing machinery. The steel bar bending machine is the work of processing the steel bar to bend the steel bar. We must strictly follow the standard procedures when operating the steel bar bending machine, so as to ensure the steel bar bending machine. Normal use, then the steel bending center will introduce the safe operation requirements when operating the steel bar bending machine. Interested friends will come to understand it.

1. The operator must undergo qualified training and practice. Before operating the steel bending machine, it should be carefully checked whether the parts of the machine are in the normal working range. The test operation is required before the correct operation. Check the presence or absence of abnormal audible vibrations and other abnormal conditions in a timely manner, and only operate when there is no abnormality in the trial run.

2. The steel bending machine body should be safely grounded. Before operation, it should be carefully checked whether the power line grounding wire is abnormal or not. If there is a need to replace it in time, we must concentrate on the operation of the steel bending machine. The steel bars must be placed in the middle and lower parts of the plug. It is strictly forbidden to bend the steel bars of the super-section size, and the direction of rotation must be accurate.

3. During the operation of the steel bar bending machine, it is not allowed to carry out refueling and cleaning work. It is strictly forbidden to replace the mandrel and other components. After the work is completed, the medicine must be powered off in time to clean up.

The above is the safe operation requirements of the steel bar bending machine. We must operate according to the requirements when operating the steel bar bending machine, so as to avoid accidental failure. For more details, please pay attention to our company website.