CN
It is used for various common carbon steels, rebars and other materials in construction engineering, which are processed into various geometric shapes required by the project. The steel bar can be bent into various shapes required in bridges and construction projects. According to the transmission mode, it is divided into mechanical transmission and hydraulic transmission, and according to the structural characteristics, it is divided into desktop and portable.
1, the purchase points of steel bending machine
1. Choose according to price. Different types of Steel Wire Bending Machines have different prices, and the gap is large. When purchasing the machine, you should purchase according to the budget, to avoid wasting
Between energy.
2. Choose according to workload. If the workload is large, it is recommended to choose a machine with higher power and faster speed.
3. Choose according to the after-sale situation. When considering the quality of the machine, after-sales service is equally important. When purchasing, be sure to choose a manufacturer with perfect after-sales service.
2, the purchase trap of buying steel bending machine
1. Freight trap. Negotiate with the manufacturer at the time of purchase and clearly stipulate the freight problem in the contract to avoid economic losses in logistics.
2. Charge old with new. When buying a brand new rebar bending machine, the merchant sent it 90% new, or someone else sent it back to the repaired refurbished machine.
3. Recharge inferiorly. The samples were clearly seen at the time of purchase. When delivered, the appearance of the machine was brand new, and the internal parts were replaced with old ones.
4. The model is wrong. Because the appearance difference of different models of steel bending machine is not big, be sure to check the nameplate of the machine when receiving the goods to avoid the machine model sent too large or too small to work.
3, Mistakes in buying steel bending machine
1. The lower the price, the better.
The quality of the steel bar bending machine is not evaluated by price, but most construction machinery is “a penny-a cargo”, which is too convenient. It is likely that the merchant is trapped.
For the trap, the machine you bought cannot be used or needs to be repaired, so it will cost more money.
2. Choose a larger steel bar bending machine.
First of all, it is necessary to clarify the diameter range of the steel bar to be processed. The larger model of the steel bar bending machine can only handle the larger diameter steel bar.
Rebar cannot be processed, so it is necessary to specify the size of the steel bar to be processed, and select the corresponding machine according to the size.
4. Maintenance of purchased steel bending machine
1. The operator must understand the structure, performance, and operating methods of the device.
2. It requires professional operation and maintenance to keep the machine clean, regular maintenance and regular attention to the operation and operation of the machine.
3. After using the machine, apply proper amount of lubricating oil to the specified part.
4. Before starting work, adjust the bending accuracy of the machine according to the bending degree of the reinforcement.
5. Clean up the iron debris on the work surface in time.
6. There should be regular electricians and electrical maintenance personnel to carry out electrical inspection and maintenance to avoid bad use.
7. The machine is lubricated with calcium-based grease and replaced and replaced every three months.
8. The steel bar bending machine must be stable when placed, and the steel bar and the machine must be horizontal and straight when in the working state.
9. When stop working, cut off the main power switch.
10. It is forbidden to carry out live work during inspection and maintenance.
After understanding this, I believe you will be able to buy a satisfactory bending machine!
