Straightening Machine Operation Requirements and Causes of Abnormal Sound

For quality requirements of operators, first of all, we should train operators how to operate equipment, they must be trained no matter how easy it is, because Wire Straightener must have some accident in the process of operating, if it can not be dealt with in time or force stop it, it must be very dangerous and cause terrible results. As a result, the regular operations of machine must be mastered so that they can work with safety.

Besides, many companies need long-time working hours, for operators, long-time adrenaline surge is necessary for them, if they are tired or absent-minded, there may be some problems and danger. Operators must be energetic without drinking habits, it is safer for production without accident.

Operator also should master the daily maintenance work of wire straightener, there is some advice for you, I hope it can help you.

1. Maintain the motor base, aligning drum, feeding box pulley, chain sprocket and drawing roller well

• Check screw, bearing and straightening wheel bracket carefully before working

• Clean and maintain it every month

• Check the temperature of each bearing and fuel tank often in the process of working

• Adjust spinning and oiling in straightening drum of wire straightener

Double Wire Straightening Machine is widely used in constructional engineering, it is loved by many people because it can improve processing speed. However, many customers said that there is some abnormal sound in the process of using wire straightener, why? I think, that abnormal sound may be from its feeding box. Generally speaking, there are three reasons for abnormal sound, one is bearing damage, the second is clamps damage, the third is apical teeth phenomenon between top gear and bottom gear, how to solve these problems? There are some ways to solve it:

1. Ways for bearing damage is checking the damaged condition of bearing, changing it if it is seriously damaged

• Ways for clamps damage is checking the damaged condition of clamps, changing it if it is seriously damaged

3.Ways for apical teeth phenomenon between top gear and bottom gear is putting steel bar and turning on it, top gear fault will disappear because operation of machine

Problems must be solved in time when it comes, or it will cause a loss to production, so we should use efficient ways to solve the problems of Wire Straightening Machine. I hope the above-mentioned ways can help you operate straightener better.