Welcome to SKZ Intelligent Equipment Co. , Ltd. website!
Industry News
.
Contact Us
Service Line:
+86-18617039171
Email:
info@skz-tech.com
Address:
Room2101, JiaAnDa Mansion, No.110Huafan Rd, Tongsheng Community, Dalang St, LongHua District, ShenZhen, China

Installation And Maintenance Of High Speed Straightening Cutting Machine

Release Time:2023-04-02 23:07:25Click rate:

The High Speed Straightening Cutting Machine is placed horizontally, and the straightener rod frame and the host machine are fixed with screws. Straight bar sliding back and forth, put under the cutter, switch on the power supply, we are generally three phase electricity. Check the position of the key inside the straightening rod and determine the length to be cut off. When the above is completed, we can try the silk.

Put the whole plate of silk, horizontal to the line frame, there should be a balance. Find the thread head, from the back of the machine to go forward, by adjusting the wire and straightening mold or straightening roller contact Angle, can achieve the straightening effect, up and down the silk wheel, the size of the groove with, can be faster out of the silk, some straightening machine without the silk wheel, it is different from the machine with the silk wheel straightening way. The thread passes through the aligning barrel to the positioning key, and the machine completes a straightening and cutting process.

After using the High Efficiency High Speed Straightening Machine for a period of time, we should add a little lubricating oil to the eccentric part of the box, the tension spring should be moderately tight, the spring spring elasticity should be better, and the parts should be updated in time if they are damaged.




NEWS