CN
The Saving Time Stirrup Bender is a machine that bends the steel bars into U-shaped legs, straightening the main ribs, welding cut-off, plastic coating, technology, and packaging. The user can freely set the length, spacing, and number of holes of the processing bench. The machine can operate according to user commands.
The company independently develops short-circuit heating, dip-coating process, traditional electric block or high-frequency force heating technology, saving cost by 30%-40%, and maintenance cost is lower than ordinary horse stool machine by 20%-30%.
It only requires one person to operate and the labor cost is low. The equipment concept is advanced, the actual operation is durable, the layout is reasonable, stable and shockproof.
The Precision Machining Stirrup Bender is generally made of low-carbon steel with a diameter of 5.5 mm. The legs are welded by a 4 mm low carbon steel spot welder. The legs are coated with plastic powder or paint to prevent oxidation. Generally, there are five pairs of symmetrical. The composition of the legs, the iron horse stool is evenly laid under the steel bars during construction, used to support the steel bars, and it is easy to fill the concrete under the steel bars. Due to the structural science, the iron horse stool has been accepted by the construction field and quickly applied.
