What are the Requirements for the Safe Production of Stirrup Bending Machine?

Adjust the horizontal accuracy of the stirrup bending machine according to the instructions. Place the stirrup bending machine on the foundation, level it in a free state, and then tighten the anchor bolts evenly. To find the foundation level of the installation level, installation should be performed on the main working surface of the press brake, such as the surface of the guide rail or the foundation surface of the component. When evaluating the installation height of the bending machine, the reading of the spirit level is not greater than 0.04 / 1000 mm. For precision bending machines, the reading of the spirit level is not more than 0.02 / 1000 mm. When measuring installation accuracy, choose a time with a constant temperature throughout the day. Avoid using installation methods that will cause forced deformation of the bending machine to meet the needs of height adjustment. Otherwise, the basic components of the equipment will be deformed, which will lead to changes in the accuracy of the guide rails and changes in the matching and connection methods of the guide rail components, which will damage the accuracy and performance of the bending machine. High-precision CNC bending machine can be adjusted by elastic support to suppress equipment vibration.

So what are the requirements for the safe production of stirrup bending machines? Next, Precision Machining Stirrup Bender Supplier will tell you.

1) It is strictly prohibited to remove or move the maintenance signs and warning signs on the stirrup bending machine.

2) Do not disassemble the rotary table at will. It is strictly forbidden to change the position of the tool in the magazine by manual tool change.

3) Before machining, please carefully check the origin of the workpiece coordinate system, and check whether the machining trajectory has caused interference with the fixture, workpiece and stirrup bending machine. After verification, a new procedure can be executed.

4) Magazine door, protective baffle and protective cover should be complete, flexible and reliable. It is strictly forbidden to open the electrical cabinet door when the stirrup bending machine is running. When the ambient temperature is high, it is not allowed to destroy the power distribution cabinet door interlock switch to force heat dissipation.

5) The chip removal mechanism should operate normally. Do not clean chips with hands and compressed air.

6) No sundries should be placed on the bed, and the surroundings of the equipment should be kept tidy.

7) When installing tools in the CNC machining center, keep the spindle taper holes clean. After closing, the spindle should be toolless.

8) During the maintenance of Stirrup Bending Machine, it is strictly forbidden to start the machine. After a failure, the equipment must be identified and eliminated, and the rebar bender must be restarted.

9) Pay attention to the display status of the equipment during processing and handle abnormal situations in time. Pay particular attention to safety operations such as alarms, emergency stops and overtravel.

10) Before cleaning the stirrup bending machine, first stop each coordinate axis in the middle position, turn off the power as required, and then clean the stirrup bending machine.

The above are the requirements of Rebar Shear-Line Supplier for the safe production of steel bar bending machines. Hope to help you.