CN
The Stable Cage Making Machine is suitable for the bending of the main skeleton steel in the concrete structure of high-rise buildings, highways, high-speed railways, large bridges, etc. It can process the degree of rebar with a diameter of φ32mm. This machine is equipped with advanced equipment capable of bidirectional bending in one working unit at the same time. It is a high-tech product developed by our company with independent intellectual property rights. Reinforcement cage equipment manufacturers supply daily inspection of the moving parts of the steel cage welding machine, especially the variable diameter skateboard, electrode guide and reducer screw, must be daily. 1 to 2 months to check the speed of the reducer and hydraulic station. If there is any shortage, it should be added. If there is oil leakage, it should be repaired in time. Regularly use dust from the paint cabinet or the breeze hair dryer electrical cabinet every week to keep the electrical cabinet clean, otherwise it may cause short-circuit burnout equipment. Steel cages are generally long and heavy.
The number of main ribs varies: the equipment we provide is generally provided by multiple main ribs, but when it is necessary to process the steel cages with different main ribs, it is necessary to replace the parameters of the chute template and the number and distance of the main rib sliders. The problem of ribbing: For the need for a large number of main ribs, the problem of the main ribs in the small end. This Automation Cage Making Machine can be easily implemented. Moreover, due to the influence of the height of the gantry (the rigs are generally not more than 10M), during the construction, the steel cages should be made in sections, and the steel cages of each pile are composed of several steel skeletons. When calculating the length of the steel cages In addition to paying attention to the position of the joint is staggered, but also pay attention to calculate the welding length. The length of the sectioned steel cage is preferably fixed length of the steel bar, but it should not be shorter than 6m. When connecting, 50% of the steel joints should be staggered and welded, and the two steel shafts are in a straight line.
