CN
Rebar Shear-line belongs to a type of steel cage equipment. The accuracy of the spacing between the steel bars of the steel cage is relatively high, so the production quality must be controlled during production. NC steel bar cutting production line can be widely used in construction, highway, high-speed rail, tunnel, water conservancy, power plant, nuclear power plant and other industries. It is suitable for continuous cutting of steel bars of various specifications and different lengths. Cut and sort. The rebar shear-line is relatively fast in processing, and the processing quality is relatively stable. So how is the rebar cut line processed? Double Wire Straightening Cutting Machine Manufacturer will tell you.
1. When rebar shear-line is processed, the main reinforcement is first loaded, and the main reinforcement must be unloaded in advance and placed on the storage rack.
2. Then there is the coil bar feeding, and the coil bar is hung on the pay-off rack.
3. The following is to thread the main tendon and tighten it. The odor distribution plate is composed of multiple distribution plates, so it will rotate synchronously.
4. Then you can thread the coil tendons and twist them together. After they are done, they can be welded.
5. After welding, the steel cage and the rotating disk are separated. Then remove the cage and reset the moving disk.
So how do we use rebar shear-line efficiently? Rebar Shear-Line Manufacturer will share the use tips below.
First of all, understand the product advantages of reinforcement shear lines:
1. High degree of automation greatly reduces labor intensity
2. The whole machine is equipped with a horizontal feeding device, which is convenient for loading.
3. The main engine head has good lubrication performance and adopts distributed oil injection system.
4. Scissor blade design is adopted to cut off the amount of material deformation
5. Widen the inlet / outlet rack, which can process multiple steel bars at one time
6. The positioning baffle is used to determine the length. The positioning is simple and accurate, and the length can be determined to any length.
7. A variety of storage devices, which can be used in a single position or combined in multiple positions, can provide a variety of different combinations. Increases rebar storage flexibility.
8. Small processing error and low material loss. Reduce material costs.
Therefore, we should pay attention to the following when operating the reinforcement shear line:
First of all, we need to know that when using rebar shear-line, multiple people need to operate, so everyone needs to cooperate with each other when operating. For the machine, we have to do a good job of maintenance and storage, and arrange for someone to take charge.
Secondly, for the protection of blades of rebar shear-line blades, the sharp edges of the blades must be kept at all times to prevent the blades from becoming dull and the corresponding grinding operations should be performed in time. When cutting, you must pay attention to cutting two different types of materials on the machine at the same time, and it is not allowed to perform overlapping cutting operations.
When rebar shear-line is used for feeding, it is strictly forbidden to use the hand to press the plate, especially when cutting short materials, the remaining iron should be used to press the plate, and keep hands away from the knife edge.
The above is the processing flow of steel bar shearing line and precautions during operation, I hope to help everyone.
