CN
Basic features of Stirrup Bending Machine:
1. Through two sets of horizontal and vertical straightening rollers, which can be adjusted automatically, plus four traction wheels, driven by imported servo motors, to ensure better steel bar straightening accuracy.
2. Bending and shearing mechanism: driven by imported servo motor, the bending arm can rotate and zoom at high speed, and the shearing mechanism is completed at high speed to ensure bending accuracy.
3. Control system: This machine uses overseas mature control system with high reliability. Control system fault diagnosis and alarm function.
4. Can design any kind of corner ancient and modern graphics and outline types, can store more than thousands of different product shapes, and is equipped with storage graphics library, so a variety of large-scale production.
5. Can produce products of any shape, no mechanical adjustment is needed; there is no need to interrupt processing at fixed bending angle.
The work of Stirrup bending machine maintenance is:
1. Daily maintenance workers inspect the stirrup bending machine in charge and make detailed records for future reference.
2. The enterprise shall take corresponding measures, pay attention to the environment to avoid wind and sun, and ensure that the performance of the equipment’s stirrup bending machine is not affected.
3. Stirrup bending machine generally does not disassemble parts, when it must be disassembled, it should be performed by a specialized repairman. If an abnormal phenomenon is found during the operation of the stirrup bending machine, it must be stopped immediately.
4. Operate strictly in accordance with the processing range specified in the equipment instruction manual. It is not allowed to use the stirrup bending machine for over specifications, over weight, over load, and over pressure.
5. Stirrup bending machine’s lubricating oil, wiping materials and cleaning agents should be used strictly in accordance with the instructions, and should not be replaced casually.
6. The accessories and special tools of the equipment should have a special shelf capacity. They must be kept clean to prevent rust and injury. They must not be loaned or used for other purposes. Equipment lubrication is an important part of the on-site use and maintenance of stirrup bending machine. Correct and reasonable lubrication of the stirrup bending machine can reduce friction and wear of parts of the stirrup bending machine, prolong the service life of the equipment, give full play to the effectiveness of the stirrup bending machine, reduce functional loss, and prevent equipment from corrosion and thermal deformation. On the contrary, neglecting the lubrication of the stirrup bending machine, improper lubrication of the stirrup bending machine will definitely accelerate the wear of the stirrup bending machine, cause frequent equipment failures and accidents, accelerate the deterioration of the technical status of the equipment, and affect the product quality and output. Therefore, stirrup bending machine management, staff and maintenance personnel should pay attention to the lubrication of the equipment.
The above is the methods of maintain Stirrup Bending Machine by Stirrup Bender Supplier introduced. Hope to help you.
